Glue line Rip
An extremely stable saw offering smoother
cutting for all glue line applications on either
straight or shadow line rip saws.
Material: Wood
COM 1002
Combination
An excellent all around saw ideally suited for the small woodworking or cabinet shops where one saw is used for all different types of cutting.
It can be used for ripping or crosscutting.
Material: solid woods, particle board, plywood or laminated panels.
Saw For Wood
General Purpose Cut Off
Designed for all around general purpose cutting.
Material: solid woods, plywood, masonite, chipboardand laminated formica.
GP 1004
General Purpose Cut Off
Designed for all around general purpose cutting
in solid woods, plywood, amazonite, chipboard and laminated Formica.
Recommended for cutting all types of abrasive materials, such as chipboard or high pressure
laminates.
SP 1005
Standart Purpose Cut On
For fine finishing cuts in:
in plywood, veneered panels, masonite coated or uncoated.
Crosscuting in:
hard or soft wood, plexiglass over 1/2 inch thickness.
*ideal for table saws.
SP 1006
Standart Purpose Cut On
For fine finishing cuts in plywood, veneered
panels, masonite coated or uncoated,
crosscutting in hard or soft woods, plexiglas over 1/2 inch thickness.
*Ideal for table saws.
Recommended for cutting of all types of abrasive materials.
Special Purpose Cut Off
For smoothest possible finish in plywood, veneer,
laminated panels, coated hardboard, plexiglass up to
3/8 inch thickness.
For crosscutting of both hard or soft woods up to 3/4 inch thick.
SPG 1008
Special Purpose Cut Off
For smoothest possible finish in plywood, veneer, laminated panels, coated hardboard, plexiglass up to 3/8 inch thickness.
For crosscutting of both hard or soft woods up to 3/4 inch thick.
Recommended for cutting of all types of abrasive materials.
AP 1009
All Purpose
The saw blade that can cut all.
Soft and hard wood, riping and crosscut, plywood,
MDF, chipboard, melamine, formica and more..
Extra fine finish.
Can be used on radial or table saws.
TRG 1013
Thin Rim
The perfect saw to use where there is a need
for a minimum of stock removal per cut, as in the cutting of plastic or veneer strips for edge banding.
Mitre
Especially designed for cutting wood mouldings
on all types of mitre machines.
Negative tooth design provides the least
possible grabbing of material.
DFN 1016
Double Faced Laminate
Hi-alternate top bevel teeth - 32°.
Smoothest cutting saw for double sided
materials such as Melamine, Kartron & Veneer.
Can be used on radial or table saws.
DFT 1017
Double faced Laminate
The perfect saw for the best possible cutting of
formica and Melamine laminated panels.
These blades can perform equally as well on
both radial or table saws.
Recommended for cutting of all types of
abrasive materials.
SPA 1007
MS-R 1015
